Egress Bandwidth Control - Planet GS-4210-16T2S User Manual

The page includes the following fields:
Object
• VLAN
• Port
•
Rate (Kbps)

4.8.5.3 Egress Bandwidth Control

This page provides to select the egress bandwidth preamble. The Egress Bandwidth Control Setting and Status screens in
Figure 4-8-34, Figure 4-8-35
The page includes the following fields:
Object
• Burst Size
• Port
• State
•
Rate (Kbps)
User's Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
Figure 4-8-33: VLAN Ingress Bandwidth Control Status Page Screenshot
Description
Display the VLAN group information.
The switch port number of the logical port.
Display the current ingress rate limit.
and Figure 4-8-36 appear.
Figure 4-8-34: Egress Bandwidth Control Settings Page Screenshot
Description
Allow assigning burst size and the options are 1 to 65535. Unit: Bytes.
Select port number for this drop down list.
Enable or disable the port rate policer. The default value is "Disabled".
Configure the rate for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1000000, must a multiple of 16.
233