User's Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
Discard/SNMP/Log/ Shutdown:
If Limit + 1 MAC addresses is seen on the port, shut down the port. This implies
that all secured MAC addresses will be removed from the port, and no new will
be learned. Even if the link is physically disconnected and reconnected on the
port (by disconnecting the cable), the port will remain shut down. There are three
ways to re-open the port:
1) Disable and re-enable Limit Control on the port or the switch,
2) Click the Reopen button.
Also appears under SNMP and System log.
• Trap Frequency (sec.)
Allow to input the seconds for trap frequency.
Button
: Click to apply changes.
Figure 4-9-43: Port Security Status Page Screenshot
283