Sun Oracle Sun SPARC Enterprise M3000 Product Notes page 39

XSCF Reference Manual
TABLE 3-6
man page
setroute(8)
setupfru(8)
setupplatform(8)
showdevices(8)
showenvironment(8)
showhardconf(8)
showlogs(8)
showpacketfilters(8)
Change
• Added to OPTIONS:
"You cannot specify the loopback address (127.0.0.0/8), the network address,
or a broadcast address."
• Changed in OPTIONS:
Old text – "If you specified 0.0.0.0 in the -n option, do not specify the -m
option."
New text – "If you specified 0.0.0.0 in the -n option, you must specify 0.0.0.0
in the -m option or you must omit the -m option."
Added to EXTENDED DESCRIPTION:
"Although a CMU with two CPUMs can be configured into Quad-XSB mode on
an M8000/M9000 server, the server generates a "configuration error" message for
these XSBs because they do not have at least one CPUM and memory."
Added the following information: "An XSCF user account user name cannot
match an LDAP user name and an XSCF user account number (UID) cannot
match an LDAP UID number. "
Added to EXTENDED DESCRIPTION:
"The showdevices(8) command displays a complete list of devices when
executed right after a Solaris OS boot or a DR operation. However, when
executed at other times, showdevices does not display a complete list if the
Solaris OS has unloaded drivers for any unused devices. To be certain the
displayed list is complete, run the devfsadm command with the -v option on
the domain before running showdevices. For more information about the
devfsadm command, see the Solaris devfsadm(1M) man page."
Added:
"Airflow volume information is not supported on the M4000/M5000 servers."
Replaced:
Old text – "The power consumption information is displayed on the
M3000/M4000/M5000 servers."
New text – "The power consumption information is displayed on the M3000
server."
Added to EXAMPLES: A new example of a M3000 server with DC power, added
PCI card information, and added -M option.
Added:
-M option, new information for Status and Detail log/Power log in EXTENDED
DESCRIPTION, and other references to Pow.Fail/Recov.
This new man page was added in the XCP 1092 release.
Chapter 3 Information About Software 27