Documentation Updates; Sparc Enterprise M3000/M4000/M5000/ M8000/M9000 Servers Xscf Reference Manual - Sun Oracle Sun SPARC Enterprise M3000 Product Notes

Documentation Updates

This section contains late-breaking information that became known after the listed
document was published or that was very recently added.
Note – Online man pages are updated more frequently than the
M3000/M4000/M5000/ M8000/M9000 Servers XSCF Reference Manual.
SPARC Enterprise M3000/M4000/M5000/
M8000/M9000 Servers XSCF Reference Manual
The following changes are not included in the XCP 1090 edition of this document
dated August 2009.
XSCF Reference Manual
TABLE 3-6
man page
Advanced Directory and
LDAP/SSL man pages
adduser(8)
applynetwork(8)
ioxadm(8)
password(8)
setdscp(8)
setdualpowerfeed(8)
sethostname(8)
Change
Four new man pages related to these features:
setad(8), setldapssl(8), showad(8), and showldapssl(8). You can use the
man(1) command to view these man pages online.
Added the following information: "If the Service Processor is configured to use
Lightweight Directory Access Protocol (LDAP), Active Directory, or LDAP/SSL
for user account data, the user name and UID (if specified) must not already be
in use locally or in LDAP, Active Directory, or LDAP/SSL."
Modified for clarity.
Modified to include new information.
Modified value ranges for clarity. Most are 1 - 999999999.
Added the following text:
"The specified netmask must be a subset of the default netmask based on
network class.
Modified to include the statement: "The dual power feed mode cannot be used
with 100V power on M4000/M5000 servers."
Added information in EXTENDED DESCRIPTION.
SPARC Enterprise
Chapter 3 Information About Software 25