Solaris Issues Fixed In Solaris 10 5/09 - Sun Oracle Sun SPARC Enterprise M3000 Product Notes

Solaris Issues Fixed in Solaris 10 5/09

TABLE 3-4
them in earlier releases.
Solaris OS Issues and Workarounds Fixed in Solaris 10 5/09
TABLE 3-4
CR ID Description
6623226 The Solaris command lockstat(1M) or the
dtrace lockstat provider might cause a system
panic.
6680733 Sun Quad-port Gigabit Ethernet Adapter UTP
(QGC) & Sun Dual 10 GigE Fiber XFP Low
Profile Adapter (XGF) NICs might panic under
high load conditions.
6689757 Sun Dual 10 GigE Fiber XFP Low Profile
Adapter (XGF) with a single or improperly
installed XFP optical transceivers might cause
the following error to show on the console:
The XFP optical transceiver is broken
or missing.
6725885 cfgadm will display non-existent M3000
system boards (SB1 to SB15).
lists issues that have been fixed in Solaris 10 5/09 OS. You might encounter
Workaround
Do not use the Solaris lockstat(1M)
command or the dtrace lockstat provider.
There is no workaround available.
Check and make sure that both XFP optical
transceivers are firmly seated in the housing.
Do not mix INTEL and Sun XFP optical
transceivers in the same Adapter.
Do NOT plumb a port with the ifconfig
command if the port does not contain an XFP
optical transceiver or it contains one but the
transceiver is not in use.
The cfgadm output for SB1-SB15 can be
ignored.
Chapter 3 Information About Software 23