Sun Sparc Enterprise M3000 Server Product Notes For Xcp 1092; What's New In Xcp 1090, 1091 And 1092 - Sun Oracle Sun SPARC Enterprise M3000 Product Notes

1
C H A P T E R
Sun SPARC Enterprise M3000
Server Product Notes for XCP 1092
This document covers the XCP 1090, XCP 1091, and XCP 1092 firmware releases.
This chapter contains the following sections:
"What's New in XCP 1090, 1091 and 1092" on page 1
■
"Minimum Required Firmware, Operating Systems, and Browsers" on page 7
■
"Solaris Patch Requirements" on page 8
■
"Obtaining Solaris Patches" on page 8
■
"Functionality Issues and Limitations" on page 9
■
"Additional Information and Procedures" on page 12
■

What's New in XCP 1090, 1091 and 1092

The XCP 1092 release updates information about the Active Directory and
■
LDAP/SSL features that were were introduced in the XCP 1091 release..
The XCP 1092 firmware is the first XCP release to support the new commands
■
setpacketfilters(8) and showpacketfilteres(8). See the new man pages
using the man(1) command.
The XCP 1091 firmware was the first XCP release to support the 2.75GHz
■
SPARC64 VII processor on the Sun SPARC Enterprise M3000 server. Earlier XCP
firmware releases do not support this faster version of the processor, which in
other respects is functionally identical to all SPARC64 VII processors.
The XCP 1091 firmware introduced the Active Directory and LDAP/SSL features.
■
See
on page
"Active Directory and LDAP/SSL" on page 2
25.
and "Documentation Updates"
1