Table of Contents
Advertisement
1-10
Introduction
Instrument Installation
Only an authorized Carl Zeiss Meditec service representative should install the Stratus OCT.
We do not provide assembly and installation instructions. In consultation with the buyer,
Carl Zeiss Meditec schedules a free on-site installation appointment to coincide with
delivery. System installation and initial calibration require approximately one business day.
Note: Only trained CZM personnel may perform calibration.
Care in Handling
Use extreme care when handling and transporting the Stratus OCT shipping boxes. The
instrument contains fragile optics that require highly precise alignment.
Installation Requirements
• The instrument with the optional power table requires an area at least 6' x 8' (1.80 m
by 2.4 m) for installation and patient comfort during use.
• To prevent heat buildup that could damage the instrument, you must install it in a
ventilated room and must not block the ventilated instrument covers that allow heat
to dissipate from the device. For more information on acceptable operating
conditions, see the specifications for
• The Stratus OCT should operate on a dedicated power outlet. Based on your
specification, we configure your Stratus OCT at the factory to use either 100/120V or
220/240V line voltage.
Tips to Avoid Damage
Note: Users are not authorized to dismantle or modify the Stratus OCT hardware. To
transport the instrument outside the office, you must consult with a Carl Zeiss
Meditec service technician. Failure to do so voids all warranties offered with the
Stratus OCT.
• Only Carl Zeiss Meditec authorized technicians should disassemble or service this
instrument. In the case of malfunction, error messages or operational problems, call
Carl Zeiss Meditec customer service: In the U.S., call 800-341-6968. Outside the U.S.,
contact your local Carl Zeiss affiliate or distributor.
• This instrument has no special measures to protect against harmful ingress of water
or other liquids (classified IPXO—ordinary equipment). Do not place containers of
liquid on or near the instrument, and do not use aerosols on or near it.
• In case of a non-medical emergency related to the instrument, unplug the power cord
from the wall outlet and call for service immediately.
• There are no user-replaceable parts in the instrument. For the replacement of any
component, accessory, or peripheral, including fuses and lamps, call Carl Zeiss
Meditec customer service: In the U.S., call 800-341-6968. Outside the U.S., contact
your local Carl Zeiss affiliate or distributor.
Stratus OCT User Manual
Environmental Conditions
PN 2660021134133 A
on page 11-2.
Hide quick links:
Advertisement
Table of Contents
