Please refer to the Stratus OCT Technical Support section of our website
(www.meditec.zeiss.com/stratus) for the current list of approved software, including
approved updates and patches to the Windows operating system and security software.
Prohibited Activities
The following activities are prohibited using the Stratus OCT instrument.
WARNING: Attempting to perform these prohibited activities may void your
Stratus OCT warranty and may result in damage to your Stratus OCT system
software. Carl Zeiss Meditec is not responsible for software upgrades or
repairs necessitated by the attempted performance of the following
prohibited activities.
• Do not relocate the Stratus OCT database to a network drive.
• Do not share Stratus OCT folders with other computer systems via the network.
• Do not share the Stratus OCT system printer on the network.
Network Activities Not Supported
Carl Zeiss Meditec does not support the following network activities, although they may be
possible.
Note: The user bears responsibility for any system performance degradation or any
other change or defect resulting from the attempt to perform the following
activities. Carl Zeiss Meditec is not responsible for software repairs or
upgrades necessitated by the attempted performance of the following
network activities.
• Network printing, i.e., printing with a printer other than the Stratus OCT system
printer. If you wish to use a third party printer, seek technical support from your
printer manufacturer. Repairs necessitated by the attempt to print using a non-system
printer are not covered under warranty.
Not Recommended
It is not recommended to print to any black and white printer because the printouts
depend on color codes to convey information.
Network File Server Minimum Requirements
The network file server must meet the following minimum requirements:
• Server class 800 MHz processor with 128 KB cache
• 256 MB RAM
• Windows, Unix or Linux server operating system
Stratus OCT User Manual
Networking Guidelines
PN 2660021134133 A
A-3