System - Danfoss ECL Comfort 210 Operating Manual

Operating Guide ECL Comfort 210/296/310, application A232 / A332

6.8 System

6.8.1 ECL version
In 'ECL version' you will always be able to find an overview of the
data related to your electronic controller.
Please have this information available if you need to contact your
Danfoss sales organization concerning the controller.
Information about your ECL Application Key can be found in 'Key
functions' and ' Key overview' .
Code no.:
Hardware:
Software:
Serial no.:
Production week:
6.8.2 Extension
ECL Comfort 310 / 310B:
'Extension' will offer you information about additional modules, if
any. An example could be the ECA 32 module.
6.8.3 Ethernet
ECL Comfort 296 / 310 / 310B have a Modbus/TCP communication
interface that allows the ECL controller to be connected to an
Ethernet network. This allows remote access to the ECL 296 / 310 /
310B controller based on standard communication infrastructures.
In 'Ethernet' it is possible to set up the required IP addresses.
6.8.4 Portal config
ECL Comfort 296 / 310 / 310B have a Modbus/TCP communication
interface that allows the ECL controller to be monitored and
controlled via the ECL Portal.
ECL Portal related parameters are set here.
Documentation for ECL Portal: See http://ecl.portal.danfoss.com
6.8.5 M-bus config
ECL Comfort 296 / 310 / 310B have an M-bus communication
interface that allows energy meters to be connected as slaves.
M-bus related parameters are set here.
128 | © Danfoss | 2017.08
The Danfoss sales and order no.
for the controller
Hardware version of the
controller
Software (firmware) version of
the controller
Unique number for the
individual controller
Week no. and year (WW.YYYY)
Example, ECL version
VI.JM.G2.02