Time & Date - Danfoss ECL Comfort 210 Operating Manual

Operating Guide ECL Comfort 210/296/310, application A232 / A332
6.2 Time & Date
It is only necessary to set the correct date and time in connection
with the first use of the ECL Comfort controller or after a power
break of more than 72 hours.
The controller has a 24 hour clock.
Aut. daylight (Daylight saving time changeover)
YES:
The controller's built-in clock automatically changes + /
- one hour on the standardized days for daylight saving
time changeover for Central Europe.
You change manually between summer and winter time
NO:
by setting the clock backward or forward.
How to set time and date:
Purpose:
Action:
Choose 'MENU'
Confirm
Choose the circuit selector at the top
right corner in the display
Confirm
Choose 'Common controller settings'
Confirm
Go to 'Time & Date'
Confirm
Place the cursor at the position to be
changed
Confirm
Enter the desired value
Confirm
Move the cursor to the next position
to be changed. Continue until 'Time &
Date' has been set.
Finally move the cursor to 'MENU'
Confirm
Move the cursor to 'HOME'
Confirm
120 | © Danfoss | 2017.08
When controllers are connected as slaves in a master / slave system
(via ECL 485 communication bus), they will receive 'Time & Date' from
Examples:
the master.
VI.JM.G2.02