Key Functions - Danfoss ECL Comfort 210 Operating Manual

Operating Guide ECL Comfort 210/296/310, application A232 / A332

6.7 Key functions

New application Erase application:
Removes the existing application. As
soon as the ECL key is inserted, another
application can be chosen.
Application Gives an overview over the actual
application in the ECL controller. Push
the dial again to exit the overview.
Factory setting System settings:
System settings are, among others,
communication set-up, display
brightness etc.
User settings:
User settings are, among others, desired
room temperature, desired DHW
temperature, schedules, heat curve,
limitation values etc.
Go to factory:
Restores the factory settings.
To:
Copy
Copy direction
System settings
User settings
Start copying
Key overview Gives an overview over the inserted ECL
key. (Example: A266 Ver. 2.30).
Turn the dial to see the subtypes. Push
the dial again to exit the overview.
A more detailed description of how to use the individual 'Key
functions' can also be seen in 'Inserting the ECL application key' .
126 | © Danfoss | 2017.08
VI.JM.G2.02