Danfoss ECL Comfort 210 Operating Manual page 85

Operating Guide ECL Comfort 210/296/310, application A232 / A332
MENU > Settings > Surface limit
Infl. min (Influence during cooling mode)
Determines how much the desired flow temperature will be influenced
(increased) if the actual surface temperature gets lower than the set limit.
See Appendix "Parameter ID overview"
9.9:
Maximum influence
5.0:
Medium influence
2.0:
Minor influence
0.0:
No influence
Value: Set the influence value
VI.JM.G2.02
Example
The limit value is set to 15 °C.
1x063
'Infl. min. ' is set to 1.3.
The actual surface temperature is 12°C (3 degrees below the limit
value).
Result:
The desired flow temperature is increased by 1.3 x 3 = 3.9 degrees.
© Danfoss | 2017.08 | 85