Danfoss ECL Comfort 210 Operating Manual page 59

Operating Guide ECL Comfort 210/296/310, application A232 / A332
Setting the desired DHW temperature
The desired DHW temperature can easily be adjusted in the
overview displays for the DHW circuit.
Action: Purpose:
Desired DHW temperature
Confirm
Adjust the desired DHW temperature
Confirm
In addition to the information about desired and actual DHW
temperature, the today's schedule is visible.
The display example indicates that the controller is in scheduled
operation and in comfort mode.
Setting the desired room temperature, ECA 30 / ECA 31
The desired room temperature can be set exactly as in the
controller. However, other symbols can be present in the display
(please see 'What do the symbols mean?').
VI.JM.G2.02
The setting of the desired room temperature is important even if a
room temperature sensor / Remote Control Unit is not connected.
Examples:
50
55
With the ECA 30 / ECA 31 you can override the desired room
temperature set in the controller temporarily by means of the override
functions:
© Danfoss | 2017.08 | 59