Configure Wan Setup - TRENDnet TEW-455APBO User Manual

High power wireless outdoor poe access point

Hide thumbs Also See for TEW-455APBO:

Table of Contents

5.1.2 Configure WAN Setup

There are three connection types for the WAN port : Static IP, Dynamic IP and PPPoE,

Please click on System ‐> WAN and follow the below setting.

In CPE mode, the WAN Port is the Wireless interface.

Mode : By default, it's "Dynamic IP". Check "Static IP", "Dynamic IP" or "PPPoE" to set up system WAN IP.

Dynamic IP : Please consult with WISP for correct wireless settings to associate with WISP AP before a

dynamic IP, along with related IP settings including DNS can be available from DHCP server. If IP

Address is not assigned, please double check with your wireless settings and ensure successful

association. Also, you may go to "WAN Information" in the Overview page to click Release button to

release IP address and click Renew button to renew IP address again.

TEW‐455APBO High Power Wireless Outdoor PoE Access Point

User Manual

Table of Contents