Displaying Igmp Filtering And Throttling Configuration - Cisco Catalyst 2950 Software Configuration Manual

Displaying IGMP Filtering and Throttling Configuration

Displaying IGMP Filtering and Throttling Configuration
You can display IGMP profile characteristics, and you can display the IGMP profile and maximum group
configuration for all interfaces on the switch or for a specified interface. You can also display the IGMP
throttling configuration for all interfaces on the switch or for a specified interface.
Use the privileged EXEC commands in
configuration:
Table 20-8 Commands for Displaying IGMP Filtering and Throttling Configuration
Command
how ip igmp profile [profile number]
show running-configuration [interface
interface-id]
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
20-28
Table 20-8 to display IGMP filtering and throttling
Purpose
Displays the specified IGMP profile or all the IGMP profiles defined on the
switch.
Displays the configuration of the specified interface or the configuration of
all interfaces on the switch, including (if configured) the maximum
number of IGMP groups to which an interface can belong and the IGMP
profile applied to the interface.
Chapter 20 Configuring IGMP Snooping and MVR
78-11380-12