Cisco Catalyst 2950 Software Configuration Manual page 9

Configuring IEEE 802.1x Port-Based Authentication
9
C H A P T E R
78-11380-12
Cryptographic Software Image Guidelines
Setting Up the Switch to Run SSH
Configuring the SSH Server
Displaying the SSH Configuration and Status
Configuring the Switch for Secure Copy Protocol
Understanding IEEE 802.1x Port-Based Authentication
Device Roles
9-2
Authentication Initiation and Message Exchange
Ports in Authorized and Unauthorized States
IEEE 802.1x Accounting
IEEE 802.1x Accounting Attribute-Value Pairs
IEEE 802.1x Host Mode
Using IEEE 802.1x with Port Security
Using IEEE 802.1x with Voice VLAN Ports
Using IEEE 802.1x with VLAN Assignment
Using IEEE 802.1x with Guest VLAN
Using IEEE 802.1x with Wake-on-LAN
Unidirectional State
Bidirectional State
Configuring IEEE 802.1x Authentication
Default IEEE 802.1x Configuration
IEEE 802.1x Configuration Guidelines
Upgrading from a Previous Software Release
Enabling IEEE 802.1x Authentication
Configuring the Switch-to-RADIUS-Server Communication
Configuring IEEE 802.1x Authentication Using a RADIUS Server
Enabling Periodic Re-Authentication
Manually Re-Authenticating a Client Connected to a Port
Changing the Quiet Period
Changing the Switch-to-Client Retransmission Time
Setting the Switch-to-Client Frame-Retransmission Number
Configuring the Host Mode
Configuring a Guest VLAN
Resetting the IEEE 802.1x Configuration to the Default Values
Configuring IEEE 802.1x Authentication
Configuring IEEE 802.1x Accounting
Displaying IEEE 802.1x Statistics and Status
8-35
8-35
8-36
8-37
8-37
9-1
9-1
9-3
9-4
9-5
9-5
9-6
9-7
9-8
9-8
9-9
9-10
9-10
9-10
9-11
9-11
9-12
9-13
9-14
9-17
9-18
9-20
9-21
9-23
9-24
9-25
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
9-15
9-16
9-18
9-19
9-19
9-22
Contents
ix