Replacing Bulbs - WACKER Group LTC 4 Repair Manual

Maintenance
4.6

Replacing Bulbs

See Graphic: wc_gr0002464
4.6.1
4.6.2
4.6.3
4.6.4
4.6.5
4.6.6
wc_tx000427gb.fm
Removal:
Shut down the engine and allow the bulb to cool.
Remove the screws (a) securing the flange rings (b) and remove the
flange rings.
Remove the lens (c) with the gasket (d) attached.
Remove the hardware securing one side of the bulb stabilizer (e).
Once removed, swing the bulb stabilizer to the side and unscrew the
bulb (f).
Installation:
Insert the bulb and secure it with the bulb stabilizer (e).
Install the gasket (d) around the lens (c) and secure the lens to the
reflector with flange ring (b) and screws (a).
c
d
a
b
f
46
LTC Repair
e
wc_gr002464