Installing / Removing Light Fixtures - WACKER Group LTC 4 Repair Manual

Maintenance
4.4

Installing / Removing Light Fixtures

See Graphic: wc_gr001427, wc_gr000542
WARNING
WARNING
Numbering Sequence of Floodlights
B Black
G Green
L Blue
P Pink
wc_tx000427gb.fm
ALWAYS turn off the light circuit breakers and shut down the engine
before disconnecting the light fixtures or changing the light bulbs.
Remove the light fixtures by disconnecting the electrical cords using
the quick disconnects (a). Remove the nuts (b) from the fixture
mounting brackets and remove both fixture and bracket from the stud.
CAUTION: Only a trained technician should be allowed to install and
remove the fixture wiring.
Note: When reinstalling the light fixtures, make sure the drain hole is
pointing down.
Bulbs become extremely hot in use! Allow the bulb and fixture to
cool 10-15 minutes before handling.
Wire Colors
R Red
T Tan
V Violet
W White
Connection Box Wiring for Floodlights
Y Yellow
Br Brown
Cl Clear
Gr Gray
44
LTC Repair
Or Orange
Pr Purple
Sh Shield
LL Light blue