Replacing Hour Meter - WACKER Group LTC 4 Repair Manual

Disassembly/Assembly Procedures

8.13 Replacing Hour Meter

See Graphic: wc_gr002444
8.13.1 Shut down the engine and disconnect the battery.
8.13.2 Remove the six screws securing the control panel cover to the control
8.13.3 Make note of the wire connections on the hour meter and remove the
8.13.4 Pull out the tabs (b) on the locking bracket (c) and remove the hour
8.13.5 Insert the replacement hour meter into the control panel and secure it
8.13.6 Attach the wires (a) to the appropriate terminals of the hour meter.
8.13.7 Secure the control panel cover to the control panel with the six screws.
wc_tx000428gb.fm
Disassembly:
panel.
wires (a) from the hour meter.
meter from the panel.
Reassembly:
with the locking bracket (c).
156
LTC Repair