Removing/Installing Rotor - WACKER Group LTC 4 Repair Manual

LTC Repair

7.35 Removing/Installing Rotor

See Graphic: wc_gr001641
7.35.1 Remove the M8 bolts (a) securing the rotor flex discs (b) to the engine
7.35.2 Secure the rotor flex discs to the engine using M8 bolts. Torque the
wc_tx000429gb.fm
Removal
flywheel (c) and remove the rotor assembly.
Installation
bolts to 15 ft.lbs. (21 Nm). Make sure the discs are seated completely
and evenly into the engine flywheel.
Electrical Troubleshooting
131