Replacing Receptacle - WACKER Group LTC 4 Repair Manual

LTC Repair

7.14 Replacing Receptacle

See Graphic: wc_gr002453
7.14.1 Remove the screws (a) securing the control panel cover and remove
7.14.2 Make note of the wire connections on the back of the receptacle.
7.14.3 Remove the screws (b) securing the receptacle to the control panel
7.14.4 Mount the receptacle to the control panel cover.
7.14.5 Attach the wires to the appropriate terminals on the back of the
7.14.6 Attach the control panel cover to the control panel.
a
wc_tx000429gb.fm
Carry out this procedure with the engine shut down.
Removal:
the cover.
Loosen the screws securing the wires and remove the wires.
cover and remove the receptacle.
Installation:
receptacle.
b
Electrical Troubleshooting
a
99
b
wc_gr002453