Smart Technologies smart board User Manual page 41

• You can also delete the last object created or undo the last action
performed on the current Notebook page with either the Undo
command in the Edit menu or the Undo button in the Full Toolbars.
See "Undoing Your Mistakes" on page 38.
To erase freehand annotations with the Pen Tray eraser:
1. Pick up the eraser from the Pen Tray.
The cursor immediately changes to an eraser icon.
2. Press on the SMART Board with the physical eraser, your finger
or with any other object.
The electronic ink will disappear wherever Board contact is
made.
NOTE: This method of erasing only works with freehand objects. You
cannot erase either geometric objects or Text Boxes with the Pen Tray
eraser.
"Circle and tap" erasing method:
You can also encircle any area of the Board you want erased with a
corner of the Pen Tray eraser and then tap once inside that circle to
erase that area.
Once you have removed the eraser from its Pen Tray slot, any
subsequent contact with the Board has the effect of erasing annotations.
Therefore, while holding the eraser in one hand, you can use a finger of
the other hand to completely encircle the area of the Board you want
erased and then tap once inside that circle. All traces of electronic ink
contained within that circle will immediately disappear.
NOTE: This method of erasing only works with freehand objects. You
cannot erase either geometric objects or Text Boxes with the Pen Tray
eraser.
To delete an object with Delete and Clear Page Notebook
commands:
1. Select the object(s) to be deleted as described above. These
objects may have been created either with Notebook or Pen
Tray tools.
SMART Board User's Guide 37