Exerpeutic WorkFit Owner's Manual page 21

119
Adjusting the Desk Height
1. Loosen the Long Adjustment Knob
(119) by turning it counter
clockwise.
2. Pull the Long Adjustment Knob
(119) to disengage the pin.
3. Shift the Desk Mount (87) up or
down to the desired position.
4. Release the Long Adjustment Knob
(119) to allow the pin to catch, and
then turn the Long Adjustment
Knob (119) clockwise to tighten.
0°
Adjusting the Desk Angle
1. Loosen the Pop Pin (94) by turning it in a counter clockwise direction.
2. Pull the Pop Pin (94) out to disengage the pin.
3. Tilt the Desk (88) to one of the three available positions shown above.
4. Release the Pop Pin (94) to allow the pin to catch an angle position hole, and then
turn the Adjustment Knob (94) clockwise to tighten.
Warning: Clear the Desk (88) prior to repositioning it.
ADJUSTMENTS
Adjusting the Desk Range
1. Loosen the Slide Knob (95) by
turning it counter-clockwise.
2. Shift the Desk (88) forward or
backwards to the desired position.
3. Tighten the Slide Knob (95) by
turning it clockwise to lock the Desk
(88) in place.
16°
19
33°