Denso BHT-7000 User Manual page 39

SET DATE/TIME
00/01/01 00:00
_ / / :
SET DATE/TIME
00/01/01 00:00
01/04/19 16:00_
SET DATE/TIME
01/04/19 16:00
_ / / :
Chapter 2. Getting Started the BHT-7000 and System Mode
(3) Press the 3 key on the SET SYSTEM screen
to select the "DATE/TIME" and then press the
ENT key, and the screen shown at left will
appear.
(4) Use the numerical keys to enter the year (only
the last two digits), month, day, hour, and
minute in this order. If the data is in one
digit, add a 0 (zero) preceding the data.
For the year, be sure to enter the last two
digits of the year. For the hour, enter it
in the 24-hour format.
If any of the year, month, day, hour, and
minute is not entered, the ENT key
will be deactivated.
If you make a wrong entry, press the BS key
to delete it and then enter the correct data.
[Example] To set 2001, April 19, at 4:00 p.m.
Press 0 , 1 , 0 , 4 , 1 , 9 , 1 , 6 , 0 , and
0 .
(5) Press the ENT
setting.
(6) Press the C key to return to the SET SYSTEM
screen.
23
key to register the above