Table of Contents
Advertisement
(1)
Communications parameters setting screen
SET PARAMETER
< OPTICAL >
1:TRANSMIT SPEED:
2400
9600
19200
38400 57600 115200
(2)
Communications protocol option screen
SET PROTOCOL
< OPTICAL >
1:SERIAL No. : ON
2:H.PARITY
:
ON
3:LINKUP TIME:
None
30
60 90 120
4:FIELD SPACE:
Ignore
Data
* For BHT-7000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of
, and
keys, respectively
Chapter 2. Getting Started the BHT-7000 and System Mode
Selecting "1:PARAMETER" on the SET OPTICAL
screen calls up the screen shown at left.
Highlighted is the current setting.
Select the desired transmission speed by using
the numerical keys or
then press the ENT key.
To return to the SET OPTICAL screen, press the C
key.
Selecting "2: PROTOCOL" on the SET OPTICAL
screen calls up the screen shown at left.
OFF
Highlighted is the current setting.
OFF
1 SERIAL No.:
2 H. PARITY:
3 LINKUP TIME:
4 FIELD SPACE:
Select a desired item by using the numerical keys
or
* and
ting by using the
To return to the SET OPTICAL screen, press the C
key.
53
* and
Selects whether or not the
system will add serial num-
bers to data blocks.
Selects whether or not the
system will add a horizontal
parity.
Selects the timeout length (in
seconds) to be applied when
a link is to be established.
Selects whether space codes
in the tail of a data field will
be ignored or handled as data.
* keys. Then select a desired set-
* and
If the BHT-Ir protocol has been selected, the
serial number and horizontal parity settings
will be ignored.
* keys, and
* keys.
,
,
Advertisement
Chapters
Table of Contents
