2 ] Selecting A Desired Setting - Denso BHT-7000 User Manual

[ 2 ] Selecting a desired setting

First, select a desired item on the current screen by using the numerical key or the
cursor keys ( and
*
Use the and
*
screen returns to the previous selection screen.
* For BHT-7000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of
, and keys, respectively
Chapter 2. Getting Started the BHT-7000 and System Mode
) so as to highlight the desired item.
*
keys to select a desired setting and then press the ENT key. The
*
SET COM DEFAULT PORT
1:BASIC
Optical Connector
2:SYSTEM MODE
Optical Connector
SET COM DEFAULT PORT
1:BASIC
Optical Connector
2:SYSTEM MODE
Optical Connector
SET COM DEFAULT PORT
1:BASIC
Optical Connector
2:SYSTEM MODE
Optical Connector
SET COMMUNICATION
1:OPTICAL
2:CONNECTOR
3:COM PORT
4:PROTOCOL TYPE
Press 2 or use
the desired set item.
Use * and * to select the desired
setting.
ENT
37
* and * to select
, ,