Table of Contents
Advertisement
[4.4]
Setting the special bar-code scanning parameters
SET BARCODE
1:INVERT
ON
OFF
2:DECODE LEVEL X
MINIMUM DIGITS
3:ITF
XX
4:STF
XX
5:CODABAR
XX
Black-and-white inverted label reading function (INVERT)
This function makes it possible to read white bars on a black background.
Activating this function might increase the frequency of bar-code reading errors.
This function can usually be set to OFF.
DECODE LEVEL
You may set the decode level. Decreasing the level value increases the bar-code
reading efficiency, but the BHT might misread low-quality bar codes (split or stained).
To the contrary, increasing the level value decreases the bar-code reading efficiency,
but it will disminish the possibility of misreading.
The setting range of the level value is from 1 to 9 and the default is 4.
* For BHT-7000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of
, and
keys, respectively
Chapter 2. Getting Started the BHT-7000 and System Mode
Selecting "4: BARCODE" on the SET SYSTEM menu
calls up the screen shown at left.
Highlighted is the current setting.
1 INVERT
2 DECODE LEVEL : Sets the decode level.
3 ITF
4 STF
5 CODABAR
Select a desired item by using the numerical keys
or
* and
* keys, and then select a desired
setting by using the
To increase the decode level, press the
to decrease it, press the
To increase the number of digits to be read for ITF,
STF and Codabar, press the
it, press the
* key.
Press the ENT key.
To return to the SET SYSTEM menu, press the C
key.
49
: Activates or deactivates the
black-and-white inverted la-
bel reading function.
: Sets the minimum number of
digits to be read for ITF.
: Sets the minimum number of
digits to be read for STF.
: Sets the minimum number of
digits to be read for Codabar.
* and
* keys.
* key.
* key; to decrease
* key;
,
,
Advertisement
Chapters
Table of Contents
