Table of Contents
Advertisement
(2)
Communications protocol option menu
SET PROTOCOL
< CONNECTOR >
1:SERIAL No. : ON
2:H.PARITY
:
ON
3:LINKUP TIME :
None
30
60 90 120
4:FIELD SPACE:
Ignore
Data
* For BHT-7000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of
, and
keys, respectively
Chapter 2. Getting Started the BHT-7000 and System Mode
Selecting "2:PROTOCOL" on the SET CONNECTOR
screen calls up the screen shown at left.
OFF
OFF
Highlighted is the current setting.
1 SERIAL No.:
2 H. PARITY:
3 LINKUP TIME:
4 FIELD SPACE:
Select a desired item by using the numerical keys
or
* and
ting by using the
To return to the SET CONNECTOR screen, press
the C key.
55
Selects whether or not the
system will add serial num-
bers to data blocks.
Selects whether or not the
system will add a horizontal
parity.
Selects the timeout length (in
seconds) to be applied when
a link is to be established.
Selects whether space codes
in the tail of a data field will
be ignored or handled as
data.
* keys. Then select a desired set-
* and
If the BHT-Ir protocol has been selected, the
serial number and horizontal parity settings
will be ignored.
* keys.
,
,
Advertisement
Chapters
Table of Contents
