Installation - NEC Express5800/T120d User Manual
Express server express5800 series
Hide thumbs
Also See for Express5800/T120d:
- Hardware specificftion (2 pages) ,
- Configuration manual (63 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.22.1
Installation
This section describes installation procedure for 2.5-inch hot-swap hard disk drives. Follow the same
installation procedure for 3.5-inch hot-swap hard disk drive.
Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
1.
2.
Locate the slot where you install the hard disk drive.
Install hard disk drives in ascending order of port number.
3.
Remove the dummy trays.
Dummy trays are installed in all slots.
4.
Unlock the handle of the drive carrier.
Note
In the RAID group (pack), build a Disk Array using hard disk drives that have the
same specifications (capacity, rotational speed, and standard).
Note
Keep the dummy trays for future use.
Express5800/T120d User's Guide
1. Installing Internal Optional Devices
123
Advertisement
Table of Contents
