NEC Express5800/T120d User Manual page 113

Chapter 2 Preparations
(3) 3.5-inch Fixed Type HDD cage
(a) When using SW RAID for 3.5-inch fixed type HDD cage> (1 to 4 HDDs)
Use optional K410-256(00) internal SAS/SATA cable to connect 3.5-inch fixed type HDD cage with
motherboard. Connect power cable to power connector of K410-256(00) internal SAS/SATA cable.
Refer to (<When using SW RAID for 2.5-inch HDD cage> (1 to 4 HDDs)) for connectors on motherboard and
RAID configuration jumper switch setting.
Connector on motherboard
SATA0 (SATA cable 0)
SATA1 (SATA cable 1)
SATA2 (SATA cable 2)
SATA3 (SATA cable 3)
(b) <When using optional RAID Controller for 3.5-inch Fixed HDD cage> (1 to 4 HDDs)
•
3.5-inch Fixed HDD cage can use 4 hard disk drives.
0 (SAS/SATA cable 0)
1 (SAS/SATA cable 1)
2 (SAS/SATA cable 2)
3 (SAS/SATA cable 3)
Connect cables
Global Global
Fault Activity
LED LED
Express5800/T120d User's Guide
1. Installing Internal Optional Devices
HDD
SAS 2(Ports4-7)
SAS 1(Ports0-3)
Red cable
113