NEC Express5800/T120d User Manual page 82

Chapter 2 Preparations
PCI slot performance *1
Transfer bandwidth *1
Product
Model name
name
PCI board type *2
Available card size
N8190-154 Fibre Channel controller (2ch)
(8 Gbps/Optical)
[PCI Express 3.0(x8)]
N8104-132 1000BASE-T connection board
(2 ch)
[PCI Express 2.0 (x1)]
N8104-133 1000BASE-T connection board
(4 ch)
[PCI Express 2.0 (x2)]
N8104-138 1000BASE-T connection board
(1 ch)
[PCI Express 2.0 (x1)]
N8104-128 10GBASE connection board
(SFP+/2ch)
[PCI Express 2.0(x8)]
N8104-131 10G Converged Network
Adapter (2ch) (10Gbps/Optical)
[PCI Express 2.0(x8)]
 Installed as standard
*1 Data transfer rate of PCI slot = Transfer bandwidth × Number of lanes
<Example> x8 lane = 64 Gbps (one-way)
*2 Connector size. Cards exceeding the number of sockets cannot be connected.
<Example> x4 socket can connect with x1 and x4 cards, but not x8 card.
*3 Use RS-232C cable (B).
* For details of functions of each card, refer to the technical guide.
* The card performance described in the parentheses after the Product name indicates the maximum operation performance of the
card.
* When the operation performance of a PCI board is higher than the PCI slot on the server, the PCI board operates with the
performance of the PCI slot on the server.
* PCIe3.0 #1 is available only in 2-CPU configuration.
* RAID card must be installed in the order of PCIe #2→#3→#4→#1.
82
PCIe 3.0
Slot number COM
#1
−
−
(per lane)
−
Slot size
−
−
−

−

−

−

−

−

 − Cannot be installed
Can be installed
Express5800/T120d User's Guide
PCIe 3.0 PCIe 3.0 PCIe 2.0
#2 #3 #4
x8 lane x16 lane x4 lane
8 Gb/s 5 Gb/s
Full height
x16 x8
x8 socket
socket socket
Up to 300 mm
  
  
  
  
  
  
1. Installing Internal Optional Devices
PCIe 2.0
#5
x1 lane
Remarks
x4
socket
−
For connecting an
external Fibre Channel

For additional LAN
Teaming (AFT/SFT/ALB)
and bonding with
 N8104-132/133/138 and
on-board LAN is
supported.

−
For additional LAN
Teaming (AFT/SFT/ALB)
and bonding on the same
board is supported.
Prepare SFP module
[N8104-129] if needed.
−
For additional LAN
Teaming (AFT/SFT/ALB)
and bonding on the same
board is supported.