NEC Express5800/T120d User Manual page 129

Chapter 2 Preparations
When the message as shown below appears, application of SDR data completes.
-------------------------------------
CFG Identify : ncfg1000
SDR Revision : SDR Version 00.09
-------------------------------------
Remove the media, Press any key to Reboot
Confirm that "CFG Identify" and "SDR Revision" of the installed/replaced power supply unit and HDD cage
are indicated as shown below.
Model number of server
N8100-1957F
N8100-1958F
N8100-1959F
* "xx.xx" of SDR Revision represents the revision number indicated on "SDR UPDATE
TOOL(243-423836-502)" media provided with the server.
If the applied SDR data differs from system configuration, power off the server, disconnect AC power cord,
and confirm jumper switch settings for power configuration and fan unit configuration.
Also make sure that SGPIO cable is properly connected if 2.5-inch or 3.5-inch HDD cage is installed in
the server.
If jumper setting and/or cable connection is improper, correct them, and apply SDR data again.
If no incorrectness was found, contact your sales representative.
Remove the CD-ROM "SDR UPDATE TOOL (243-423836-502)" from optical disk drive of the server.
Press any key on keyboard to restart the server.
Press the <F4> key while POST is running to launch ROM Utility.
Clear System Event Log (SEL) by selecting menus in the order as shown below.
Keyboard Type Select → Maintenance Utility → IPMI Information Viewer
→ Clear the System Event Log (SEL) Repository → Enter → Enter
Now the System Event Log (SEL) is cleared.
Press the <ESC> key to return to Off-line TOOL MENU, and select Exit. The server restarts.
HDD cage CFG Identify
N8154-43F Ncfg2000
One N8154-44F Ncfg2010
Tow N8154-44F Ncfg2020
One N8154-42F Ncfg2011
Tow N8154-42F Ncfg2021
Three N8154-42F Ncfg2031
N8154-43F Ncfg2100
One N8154-44F Ncfg2110
Tow N8154-44F Ncfg2120
One N8154-42F Ncfg2111
Tow N8154-42F Ncfg2121
Three N8154-42F Ncfg2131
Express5800/T120d User's Guide
1. Installing Internal Optional Devices
← Check the value.
← Check the value.
SDR Revision
SDR Version
xx.xx
129