Certification; Ce-Marking; Functional Safety; Ul Certifications - KEB COMBIVERT F5 Safety Manual

Drive

Hide thumbs Also See for COMBIVERT F5:

Table of Contents

CERTIFICATION

2 Certification

CE marked drive converters were developed and manufactured to comply with the reg-

ulations of the Low-Voltage Directive and EMC directive. The harmonized standards of

the series EN 61800-5-1 and EN 61800-3 were used.

This is a product of limited availability in accordance with EN 61800-3. This product may

cause radio interference in residential areas. In this case the operator may need to take

corresponding measures.

The inverter / servo drive must not be started until it is determined that the installation

complies with the machine directive as well as the EMC-directive (note EN60204).

The validity of the acceptance is only valid if the instructions given in the instruction

manual are observed.

You can find additional documentation for download at "www.keb.de" by entering the

material number in the search field.

Manuals - further parts of the instruction manual

Drawings - various formats for 3-models (e.g. Step)

Software - Operating software COMBIVIS and driver

Certificates - Declaration of conformity, TÜV certificates

FAQ - Technical infos and FAQs

EPLAN - Connection drawings

Driver converters with functional safety are marked with the FS

logo on the type plate. These units are designed and manufac-

tured in accordance with the Machine Directive. The harmonized

standard of the serie EN 61800-5-2 were used.

Acceptance according to UL is marked at KEB

devices with the adjacent logo on the type

plate.

Table of Contents