Verify that electrical service wiring has been installed at the server's predetermined location.
Refer to the respective product specifications for detailed requirements.
Verify of any additional support equipment is properly installed and operational.
At installation time, the HP representative will supervise the delivery and unpacking of the equipment.
NOTE:
No part of the installation, from unloading the crated server from the delivery vehicle to
unpacking and placement, should be performed without the supervision of an HP representative.
This is a fundamental requirement for the safety of both the equipment and personnel.
Preparing a Pre-Installation Site Planning Guide
Prior to installation, the customer will complete a systems planning document such as the 3PAR
Systems Assurance and Pre-Site Planning Guide in cooperation with the local HP 3PAR Sales
Representative or HP 3PAR Systems Engineer.
The systems planning guide is a working document that contains the following information:
Contact information for customer personnel and for HP technical sales, support, and service
personnel
Implementation project plan
Configuration information for the storage system to be installed, including system configuration
diagrams
Shipping and delivery details and requirements
Management workstation, service processor, and network information
Description of the customer environment
Volume and RAID level planning information
Customer training project plan
Additional notes and comments regarding installation
Current support matrix
System technical specifications
Systems Acceptance Certificate
Customer Services installation checklist
Storage System Cabinet Shipping Containers
A separate shipping container holds each storage system cabinet while drive magazine shipping
containers hold a maximum of 30 drive magazines each.
Shipping container measurements are as follows:
Cabinet crate (one per 2M rack cabinet): Height: 86 in. (218.5 cm) x Width: 42 in. (106.7
cm) x Depth: 48 in. (121.9 cm)
Approximate shipping weight: 1 172 lb (531.6 kg)
Drive magazine container (one per 3 drive magazines): Height 13 in. (33.1 cm) x Width 1 1
in. (28 cm) x Depth 27 in. (68.6 cm)
Approximate shipping weight: 33.8 lb (15.4 kg)
1. For systems shipped internationally and for systems with fewer than 25 drive magazines, magazines are shipped in
boxes. Each box contains three magazines.
1
Storage System Cabinet Shipping Containers
15