Description
Value Range
Default Value
RTP_CLOSE_ENABLE_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
RTCPXR_ENABLE_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
5.3.27 SRTP Settings
SRTP_CONNECT_MODE_n
Parameter Name Example
Value Format
Description
Document Version 2016-05
Specifies whether to send RTCP signals by SDP (Session
Description Protocol).
0–1
–
0: Send RTCP signals using the value specified in
"RTCP_INTVL_n", if the "RTCP_ENABLE_n" parameter is enabled.
–
1: Send RTCP signals using the value specified in the SDP
attribute "a=rtcp:".
0
RTP_CLOSE_ENABLE_1, RTP_CLOSE_ENABLE_2, ...,
RTP_CLOSE_ENABLE_16
BOOLEAN
Specifies whether to enable processing to close held RTP sockets.
•
Y (Enable RTP Close)
•
N (Disable RTP Close)
N
RTCPXR_ENABLE_1, RTCPXR_ENABLE_2, ..., RTCPXR_ENABLE_16
BOOLEAN
Specifies whether to enable or disable RTCP-XR.
•
Y: Enable RTCP-XR
•
N: Disable
N
Enable RTCP-XR
SRTP_CONNECT_MODE_1, SRTP_CONNECT_MODE_2, ...,
SRTP_CONNECT_MODE_16
INTEGER
Specifies the mode of SRTP feature.
5.3.27 SRTP Settings
Administrator Guide
259