Maintenance; Warning; Cleaning; Battery Replacement - AEMC 670 User Manual

5.1
• Remove the test leads on any input before opening the
case.
• Do not operate the clamp-on meter without a battery
case cover.
• To avoid electrical shock, do not attempt to perform
any servicing unless you are qualified to do so.
• To avoid electrical shock and/or damage to the instru-
ment, do not get water or other foreign agents into the
probe.
5.2

Cleaning

• To clean the meter, wipe the case with a damp cloth
and mild detergent.
• Do not use abrasives or solvents.
• Do not get water inside the case. This may lead to
electrical shock or damage to the instrument.
5.3

Battery Replacement

• The Clamp-on Meter Models 670 and 675 are powered
by a 9V battery. The
display when the supply voltage drops below proper
operating range. This indicates that the battery needs
to be changed.
Clamp-on Meter Models 670 and 675
CHAPTER 5

MAINTENANCE

Warning!

symbol will appear on the LCD
25