Resistance Measurement - AEMC 670 User Manual

4.6

Resistance Measurement

• Turn the rotary range switch to the
• Insert the red test lead to the red "+" input jack and
the black lead to the black "COM" input jack.
• Bring the test probe tips into contact with the sample
under test.
WARNING: Immediately disconnect the meter
if overload "
WARNING: When making a resistance mea-
surement, make sure that the power is off
(dead circuit), and that all capacitors in the
measured circuit are fully discharged.
20
" is displayed.
Clamp-on Meter Models 670 and 675
range.