4.4
AC Volt Measurement
WARNING: Maximum Input Voltage is 600V. Do
not exceed this voltage to avoid electrical shock
and/or damage to the instrument.
• Turn the rotary range switch to the
• Insert the red test lead to the red "+" input jack and
the black lead to the black "COM" input jack.
• Connect the test probe tips to the voltage to be mea-
sured.
• If reading is unstable and is hard to read, push the
HOLD button and read the measurement.
WARNING: Immediately disconnect the meter
if overload "
18
" is displayed.
Clamp-on Meter Models 670 and 675
range.