Daikin F-Series Service Manual page 184

SiBE12-712C
Outdoor Unit
25/35 class
15
19
Indoor Unit
1. Titanium Apatite Photocatalytic
Air-Purifying Filter:
• These filters are attached to the inside of
the air filters.
2. Air outlet
3. Display
4. Front panel
5. Vertical blades (louvers):
• The louvers are inside of the air outlet.
6. Air inlet
7. Air filter
8. Horizontal blade (flap)
9. Operation lamp (green)
10. TIMER lamp (yellow)
11. Indoor Unit ON/OFF switch:
• Push this switch once to start operation.
Push once again to stop it.
Outdoor Unit
15. Air inlet: (Back and side)
16. Refrigerant piping and inter-unit cable
17. Drain hose
Appearance of the outdoor unit may differ from some models.
Operation Manual
50 class
15
16
17
19
18
• The operation mode refers to the following
table.
Model
COOLING
ONLY
HEAT
PUMP
• This switch is useful when the remote
controller is missing.
12. Signal receiver:
• It receives signals from the remote
controller.
• When the unit receives a signal, you will
hear a short beep.
• Operation start ........ beep-beep
• Settings changed ..... beep
• Operation stop.......... beeeeep
13. Air outlet selection switch
14. Room temperature sensor:
• It senses the air temperature around the unit.
18. Earth terminal:
• It is inside of this cover.
19. Air outlet
16
17
18
Temperature Airflow
Mode
setting rate
COOL 22˚C AUTO
AUTO 25˚C AUTO
Instruction
5
173