Fault Log Access - Baldor 29M Installation And Operating Manual

Display Mode Continued

Fault Log Access

Action
Apply Power
Press DISP key
Press ENTER key
Press key
Press ENTER key
4-4 Programming & Operation
When a fault condition occurs, motor operation stops and a fault code is displayed on the
Keypad display. The control keeps a log of up to the last 31 faults. If more than 31 faults
have occurred the oldest fault will be deleted from the fault log to make room for the
newest fault. To access the fault log perform the following procedure:
Description
Display mode showing motor
speed.
Press DISP several times to scroll
to the Fault Log entry point.
Display first fault type and time
fault occurred.
Scroll through fault messages.
Return to display mode.
Display
Logo display for 5 seconds.
Display mode.
1 = Most Recent fault displayed.
2 = Next most recent etc.
If no messages, the fault log exit
choice is displayed.
Display mode stop key LED is on.
Comments
MN1230