Table of Contents
Advertisement
Section 1
General Information
2-4 General Information
Caution:
To prevent equipment damage, be certain that the electrical service
is not capable of delivering more than the maximum line short
circuit current amperes listed for 115 VAC or 230 VAC control rating.
Caution:
To prevent equipment damage, be certain that the input power has
correctly sized protective devices installed as well as a power
disconnect.
CAUTION: Avoid locating control immediately above or beside heat generating
equipment, or directly below water or steam pipes.
CAUTION: Avoid locating control in the vicinity of corrosive substances or
vapors, metal particles and dust.
Caution:
Do not connect any shields to the motor frame. At a minimum,
resolver signal integrity will be compromised and damage to the
control may result.
MN1230
Advertisement
Table of Contents
Troubleshooting
