2: Basic Activation - FIBARO FGCD-001 Operating Manual

4
i
NOTE
Recommended height
of installation is de-
pendant on the pur-
pose of the room and
height at which head
typically is.
i
NOTE
FIBARO CO Sensor
may operate as a
stand-alone carbon
monoxide detector or
may be used in coop-
eration with Z-Wave
Controller (eg. FIBARO
Home Center) as a part
of smart home system.
BASIC ACTIVATION

#2: Basic activation

1. Turn the cover counter-clockwise.
2. Take off the cover.
3. Remove the paper strip protecting
4. Proper powering up will be con-
5. Add the device (as described in "Add-
the battery.
firmed with a short beep.
ing/removing the device") if you
want to use it in the Z-Wave network.