#2: Basic activation
1. Open the cover.
2. Remove the battery blocker.
3. Close the cover.
4. Add the device (see "Adding/removing the device" on page 6).
5. Install the device (see "Physical installation" on page 9).
5
i
NOTE
The antenna should
be placed above the
battery. never cut,
shorten or bend the
antenna. Its length is
suited to the band at
which the system op-
erates.
i
NOTE
Metal surfaces in close
vicinity
(e.g.
metal
switch boxes, metal
door trims) may im-
pair the reception ca-
pability.
BASIC ACTIVATIOn