Canon iPF8400S Service Manual page 295

Code
Panel display
(last 4 digits)
(Large LCD)
2E03
2E04 Manual(Front)
(Paper type)
(Paper size)
Load Paper
Stop Printing
2E05 Manual(Top)
(Paper type)
(Paper size)
Load Paper
Stop Printing
Sheet printing
is selected.
2E08 Wrong paper size.
Check paper size setting on
computer.
Online: Print
Stop: Stop Printing
Wrong paper size.
Check paper size setting in
driver.
Online: Print
Stop: Stop Printing
PaprWidth Mismatch
2E09 Insufficient paper for job
Online: Print
Stop: Stop Printing
Load/Eject: Change Paper
2E0A Roll printing is
selected, but sheets are
loaded.
Press Load/Eject and
remove the sheets.
Roll printing is
selected, but manual
paper is loaded.
Roll printing is
selected, but sheets are
loaded.
Press OK,
remove the sheets,
and load a roll.
Roll printing is
selected, but sheets
are loaded.
OK:Eject Sheets
Stop:Stop Printing
Roll printing is
selected, but sheets
are loaded.
2E0B Cassette printing
is selected.
Press Load/Eject and
remove manually
loaded sheets.
Panel display
Explanation/Detection sequence
(Small LCD)
Load Papr in Cas Paper mismatch (cut sheet)
Press Online. Not cut sheet have been loaded in cassettes
when data having a cassette specification is
received.
Load Front Tray Paper mismatch (cut sheet)
No manually fed paper has been fed when
a job having a front paper feed
specification is received.
Load Top Tray Paper mismatch (cut sheet)
No manually fed paper has been fed when
a job having a top paper feed specification
is received.
Paper mismatch (cut sheet)
Not cut sheet have been loaded in cassettes
when data having a cassette specification is
received.(When paper type/ size is not
determined)
PaprSiz Mismatch Paper mismatch (size) (roll paper)
Prnt:PressOnline The width of data and that of the actually
Loaded Papr Diff loaded paper do not match.
From Spfd Size
Driver: Chk Papr
Size Setting
Loaded Papr Diff
From Spfd Size
Roll Paper Short on roll paper
Please Replace All of the following conditions have been
Paper Level Low met at the start of printing:
Replace Paper -[ON] has been selected for [Remaining
Roll Paper Detection].
-Among the paper size settings coded in the
print data, the paper length exceeds the
remaining length of roll paper.
Sheets Loaded Paper mismatch (roll paper)
Press (lower arrow) To Eject Print data having a roll paper print
Roll Selected specification has been received at the
Load Roll completion of manual feed paper pickup.
Sheets Loaded Paper mismatch (cut sheet)
Press (lower arrow) To Eject Print data having a cassette print
Cassette Selectd specification has been received at the
Load Papr in Cas completion of manual feed paper pickup.
Chapter 8
Remedial Action
Feed paper as instructed by the on-
screen guidance.
Feed paper manually from the front as
instructed by the on-screen guidance.
Feed paper manually from the top as
instructed by the on-screen guidance.
Load cut sheet.
Check the paper that is actually loaded
on the printer and the paper size setting
of the driver.
Replace the roll paper.
Check the paper that is actually loaded
on the paper and the paper feed setting
of the driver.
Check the paper that is actually loaded
on the paper and the paper feed setting
of the driver.
8-19