Ap822Ev2 Antennas; Radio-Antenna-Port Mappings; Attaching Antennas - Meru Networks AP822v2 Installation Manual

Table of Contents

Advertisement

AP822eV2 Antennas

Radio-Antenna-Port Mappings

The following table lists which radio is associated with each antenna.
TABLE 2: Radio-Antenna-Port Mappings
A1
A3
A4
A6

Attaching Antennas

An AP822eV2 has four external antenna ports, labeled A1, A3, A4 and A6, to be used for
attaching the antennas supplied with the AP. Do not leave any antenna connector open. All
connectors on the AP must be terminated either with antennas or with 50 ohm Reverse Polar-
ity SMA terminators. For a list of approved terminators, see
merusupport.
Antennas attached to a specific radio in AP822eV2 must all be of the same model. In case of
replacement, user must replace all the antennas.
AP822eV2 Antennas
Antenna Port
Radio / Channel
Radio 1
Radio 1
Radio 2
Radio 2
http://www.merunetworks.com/
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ap822Ap822ev2Ap822iv2

Table of Contents