Table of Contents
Advertisement
AP822e Antennas
Radio-Antenna-Port Mappings
The following table lists which radio is associated with each antenna.
TABLE 2: Radio-Antenna-Port Mappings
Attaching Antennas
An AP822e has four external antenna ports, labeled A1, A3, A4 and A6, to be used for attach-
ing the antennas supplied with the AP. Do not leave any antenna connector open. All connec-
tors on the AP must be terminated either with antennas or with 50 ohm Reverse Polarity SMA
terminators. For a list of approved terminators, see
port.
Antennas attached to a specific radio in AP822e must all be of the same model. In case of
replacement, user must replace all the antennas.
AP822e Antennas
Antenna Port
Radio / Channel
A1
Radio 1
A3
Radio 1
A4
Radio 2
A6
Radio 2
http://www.merunetworks.com/merusup-
17
Hide quick links:
Advertisement
Table of Contents
