Access Control - Tenda W3002R User Manual

W3002R
Wireless N300 High Power Router
2) Click OK as seen below.
Configure the same settings on the other W3002R the same way above.
Both wireless devices involved must be entered each other's MAC address for
successful WDS connection.
Note:
1. WDS feature can only be implemented between 2 WDS-capable
wireless devices. Plus, SSID, channel, security settings and security key
must be exactly the same on both such devices.

5.4 Access Control

The MAC-based Wireless Access Control feature can be used to permit or forbid
clients to connect to your wireless network.
Select SSID: Select primary SSID or secondary SSID for your filter rules to
apply.
MAC Filter Mode: "Permit Only" only allows PCs at specified MAC addresses (in
the list) to connect to your wireless network; Forbid Only: Only PCs at specified
MAC addresses list can't connect to your wireless network.
40