Wep; Operation Instructions - Tenda W3002R User Manual

W3002R
Wireless N300 High Power Router
WPS Mode: Select PBC (Push-Button Configuration) or PIN.
PBC: To use the PBC option, select it and click "Save"; Then press the WPS
button on router's back panel for about one second while enabling WPS >PBC on
the intended wireless client simultaneously.

Operation Instructions:

PBC: If you find the WPS LED blinking for 2 minutes after you press the
hardware WPS button on the device for 1 second, it means that PBC encryption
method is successfully enabled. And an authentication will be performed between
your router and the WPS/PBC-enabled wireless client device during this time; if it
succeeds, the wireless client device connects to your router, and the WPS LED
displays a solid light. Repeat steps mentioned above if you want to add more
wireless client devices to the device.
PIN: To use this option, you must know the PIN code from the wireless client and
enter it in the corresponding field on your device while using the same PIN code
on client side for such connection.
Reset OOB: Wireless module will be reset if clicked.
Note:To use the WPS security, the wireless client must be also
WPS-capable.

5.2.2 WEP

WEP is intended to provide data confidentiality comparable to that of a
traditional wired network.
Security Mode: Select a proper security mode from the drop-down list.
Default Key: Select a key from the preset keys 1-4 for current use.
32