Chapter 6 Dhcp; Dhcp Settings - Tenda W3002R User Manual

W3002R
Wireless N300 High Power Router

Chapter 6 DHCP

6.1 DHCP Settings

The Dynamic Host Configuration Protocol (DHCP) is an automatic
configuration protocol used on IP networks. If you enable the built-in DHCP
server on the device, it will automatically configure the TCP/IP settings for all
your LAN computers (including IP address, subnet mask, gateway and DNS etc),
eliminating the need of manual intervention. Just be sure to set all computers on
your LAN to be DHCP clients by selecting "Obtain an IP Address Automatically"
respectively on each such PC. When turned on, these PCs will IP information from
the DHCP server.
Enable DHCP Server: Check or uncheck the box to enable or disable the
device's DHCP server feature.
Start/End IP: Enter the starting/ending IP address for the DHCP server's IP
assignment.
Lease Time: The length of time for the IP address lease.
43