Lan Settings; Mac Clone - Tenda W3002R User Manual

W3002R
Wireless N300 High Power Router

4.3 LAN Settings

Click Advanced Settings-> LAN Settings to enter below screen.
MAC Address: Displays MAC address of LAN interface, which is NOT changeable.
IP Address: Router's LAN IP address. The default is 192.168.0.1. You can
change it according to your need.
Subnet Mask: Device's LAN subnet mask, 255.255.255.0 by default.
Note:
If you change the device's LAN IP address, please renew the IP
information of the computer that connect to the router to login to the
web management page.

4.4 MAC Clone

This section allows you to configure MAC address of router's WAN interface.
Normally you don't need to change the default WAN MAC value. However, some
ISP may bind client PC's MAC address for Internet connection authentication. In
this case, simply enter such MAC in the WAN MAC Address field or use the MAC
clone function.
MAC Address: The MAC address of router's WAN interface.
Clone MAC: Click this button to clone your PC's MAC address to the router's WAN
interface.
Restore to Factory Default MAC: Reset router's WAN interface's MAC to
factory default.
23